itd/README.md

229 lines
7.2 KiB
Markdown

# ITD
## InfiniTime Daemon
`itd` is a daemon that uses my infinitime [library](https://go.arsenm.dev/infinitime) to interact with the [PineTime](https://www.pine64.org/pinetime/) running [InfiniTime](https://infinitime.io).
[![status-badge](https://ci.arsenm.dev/api/badges/Arsen6331/itd/status.svg)](https://ci.arsenm.dev/Arsen6331/itd)
[![itd-git AUR package](https://img.shields.io/aur/version/itd-git?label=itd-git&logo=archlinux)](https://aur.archlinux.org/packages/itd-git/)
[![itd-bin AUR package](https://img.shields.io/aur/version/itd-bin?label=itd-bin&logo=archlinux)](https://aur.archlinux.org/packages/itd-bin/)
---
### Features
- Notification relay
- Notification transliteration
- Call Notifications (ModemManager)
- Music control
- Get info from watch (HRM, Battery level, Firmware version, Motion)
- Set current time
- Control socket
- Firmware upgrades
- Weather
- BLE Filesystem
- Navigation (PureMaps)
---
### Installation
Since ITD 0.0.7, packages are built and uploaded whenever a new release is created.
#### Arch Linux
Use the `itd-bin` or `itd-git` AUR packages.
#### Debian/Ubuntu
- Go to the [latest release](https://gitea.arsenm.dev/Arsen6331/itd/releases/latest) and download the `.deb` package for your CPU architecture. You can find your architecture by running `uname -m` in the terminal.
- Run `sudo apt install <package>`, replacing `<package>` with the path to the downloaded file. Note: relative paths must begin with `./`.
- Example: `sudo apt install ~/Downloads/itd-0.0.7-linux-aarch64.deb`
#### Fedora
- Go to the [latest release](https://gitea.arsenm.dev/Arsen6331/itd/releases/latest) and download the `.rpm` package for your CPU architecture. You can find your architecture by running `uname -m` in the terminal.
- Run `sudo dnf install <package>`, replacing `<package>` with the path to the downloaded file.
- Example: `sudo dnf install ~/Downloads/itd-0.0.7-linux-aarch64.rpm`
#### Alpine (and postmarketOS)
- Go to the [latest release](https://gitea.arsenm.dev/Arsen6331/itd/releases/latest) and download the `.apk` package for your CPU architecture. You can find your architecture by running `uname -m` in the terminal.
- Run `sudo apk add --allow-untrusted <package>`, replacing `<package>` with the path to the downloaded file.
- Example: `sudo apk add --allow-untrusted ~/Downloads/itd-0.0.7-linux-aarch64.apk`
Note: `--allow-untrusted` is required because ITD isn't part of a repository, and therefore is not signed.
---
### Socket
This daemon creates a UNIX socket at `/tmp/itd/socket`. It allows you to directly control the daemon and, by extension, the connected watch.
The socket uses my [lrpc](https://gitea.arsenm.dev/Arsen6331/lrpc) library for requests. This library accepts requests in msgpack, with the following format:
```json
{"Receiver": "ITD", "Method": "Notify", "Arg": {"title": "title1", "body": "body1"}, "ID": "some-id-here"}
```
It will return a msgpack response, the format of which can be found [here](https://gitea.arsenm.dev/Arsen6331/lrpc/src/branch/master/internal/types/types.go#L30). The response will have the same ID as was sent in the request in order to allow the client to keep track of which request the response belongs to.
---
### Transliteration
Since the PineTime does not have enough space to store all unicode glyphs, it only stores the ASCII space and Cyrillic. Therefore, this daemon can transliterate unsupported characters into supported ones. Since some languages have different transliterations, the transliterators to be used must be specified in the config. Here are the available transliterators:
- eASCII
- Scandinavian
- German
- Hebrew
- Greek
- Russian
- Ukranian
- Arabic
- Farsi
- Polish
- Lithuanian
- Estonian
- Icelandic
- Czech
- French
- Armenian
- Korean
- Chinese
- Romanian
- Emoji
Place the desired map names in an array as `notifs.translit.use`. They will be evaluated in order. You can also put custom transliterations in `notifs.translit.custom`. These take priority over any other maps. The `notifs.translit` config section should look like this:
```toml
[notifs.translit]
use = ["eASCII", "Russian", "Emoji"]
custom = [
"test", "replaced"
]
```
---
### `itctl`
This daemon comes with a binary called `itctl` which uses the socket to control the daemon from the command line. As such, it can be scripted using bash.
This is the `itctl` usage screen:
```
Control the itd daemon for InfiniTime smartwatches
Usage:
itctl [flags]
itctl [command]
Available Commands:
firmware Manage InfiniTime firmware
get Get information from InfiniTime
help Help about any command
notify Send notification to InfiniTime
set Set information on InfiniTime
Flags:
-h, --help help for itctl
-s, --socket-path string Path to itd socket
Use "itctl [command] --help" for more information about a command.
```
---
### `itgui`
In `cmd/itgui`, there is a gui frontend to the socket of `itd`. It uses the [Fyne library](https://fyne.io/) for Go.
#### Compilation
Before compiling, certain prerequisites must be installed. These are listed on the following page: https://developer.fyne.io/started/#prerequisites
It can be compiled by running:
```shell
go build ./cmd/itgui
```
#### Cross-compilation
Due to the use of OpenGL, cross-compilation of `itgui` isn't as simple as that of `itd` and `itctl`. The following guide from the Fyne website should work for `itgui`: https://developer.fyne.io/started/cross-compiling.
#### Screenshots
![Info tab](cmd/itgui/screenshots/info.png)
![Motion tab](cmd/itgui/screenshots/motion.png)
![Notify tab](cmd/itgui/screenshots/notify.png)
![FS tab](cmd/itgui/screenshots/fs.png)
![FS mkdir](cmd/itgui/screenshots/mkdir.png)
![FS resource upload](cmd/itgui/screenshots/resources.png)
![Time tab](cmd/itgui/screenshots/time.png)
![Firmware tab](cmd/itgui/screenshots/firmware.png)
![Upgrade in progress](cmd/itgui/screenshots/progress.png)
![Metrics tab](cmd/itgui/screenshots/metrics.png)
---
### Installation
To install, install the go compiler and make. Usually, go is provided by a package either named `go` or `golang`, and make is usually provided by `make`. The go compiler must be version 1.17 or newer for various new `reflect` features.
To install, run
```shell
make && sudo make install
```
---
### Starting
To start the daemon, run the following **without root**:
```shell
systemctl --user start itd
```
To autostart on login, run:
```shell
systemctl --user enable itd
```
---
### Cross compiling
To cross compile, simply set the go environment variables. For example, for PinePhone, use:
```shell
make GOOS=linux GOARCH=arm64
```
This will compile `itd` and `itctl` for Linux aarch64 which is what runs on the PinePhone. This daemon only runs on Linux due to the library's dependencies (`dbus`, and `bluez` specifically).
---
### Configuration
This daemon places a config file at `/etc/itd.toml`. This is the global config. `itd` will also look for a config at `~/.config/itd.toml`.
Most of the time, the daemon does not need to be restarted for config changes to take effect.
---
### Attribution
Location data from OpenStreetMap Nominatim, &copy; [OpenStreetMap](https://www.openstreetmap.org/copyright) contributors
Weather data from the [Norwegian Meteorological Institute](https://www.met.no/en)